Posted on

Why Do You Need a Phone Signal Disruptor?

Why Do You Need a Phone Signal Disruptor?

If you want to jam all cell phone signals and stay in contact with friends and family while on the go, you might consider using a phone signal disruptor. These devices are designed to block signals from major mobile phone providers, WIFI and GPS. Besides, they are portable and can easily be carried around. Moreover, they feature an independent frequency band switch, which allows you to turn on or off the band of interference to prevent unwanted interruption.

Many cell towers are located in cities or densely populated areas, where the signal quality is not good enough to keep up with the demand. Because of this, the number of cell towers in a particular area is relatively small. This is because of too many people competing for the same bandwidth. However, the number of towers is increasing in the U.S., and this number of devices is increasing rapidly. So, why is this type of signal disruptor necessary?

The basic device is quite simple. It blocks only one group of frequencies. But some sophisticated devices are able to block multiple networks simultaneously. They can even interfere with dual-mode and tri-mode phones. High-end models block all frequencies simultaneously. In addition, some can be tuned to specific frequencies. Depending on the type of signal, you might need to buy a multi-function phone signal disruptor. However, this may not be suitable for your needs, so you might have to settle for a device with a low power rating.

Using a signal disruptor to block cellular signals is a simple way to protect your privacy. This device prevents calls for up to 60 feet. Higher-powered models can even create a dead zone the size of a football field. You can also use a phone signal disruptor to “secure” your mobile phone. These products can be found in many places across the world. However, if you’re thinking of buying one, consider that they are illegal in some jurisdictions.

Another popular cell signal disruptor is the TSL-B8 jammer. This device is easy to install and use. It requires an antenna and a plug to operate. It blocks target signals automatically. The TSL-B8 jammer blocks all mobile phone signals, including VHF, WIFI, and WIFI 2.4G. With an effective range of 50 meters, it is a versatile device for a special purpose. However, it is not recommended for use in schools, as this could pose a risk of security concerns.

Another cell phone signal disruptor is the cell phone signal strength meter. The device measures signal strength in decibels. Cell phone signal strength ranges from -30 dBm to -110 dBm. The closer the decibels are to zero, the stronger the signal. In fact, a cell phone signal of -85 dBm is considered good. But the most important consideration is how often you use your cell phone.

Leave a Reply

Your email address will not be published. Required fields are marked *